抗压制干扰的离散相位编码序列设计

压制干扰会淹没目标信号,使其无法被雷达检测,在强干扰下,雷达系统可能直接瘫痪.因此,研究对抗压制干扰的方法具有重要意义.为抑制压制干扰,可采用离散相位编码序列作为发射信号,以最小化发射信号距离旁瓣为准则,固定压制干扰信号经过匹配滤波器的输出水平和离散相位编码作为约束条件,构建优化问题模型;引入交替方向乘子法嵌套拟牛顿法...     

A Weighted Inner Product Estimator in the Geometric Algebra of Euclidean 3-Space for Source Localization Using an EM Vector-sensor

In this paper, the source localization by utilizing the measurements of a single electromagnetic (EM) vector-sensor is investigated in the framework of the geometric algebra of Euclidean 3-space. In order to describe the orthogonality among the electric and magnetic measurements, two multivectors of the geometric algebra of Euclidean 3-space (G3) are used to model the outputs of a spatially collocated EM vector-sensor. Two estimators for the wave propagation vector estimation are then formulated by the inner product between a vector and a bivector in the G3. Since the information used by the two estimators is different, a weighted inner product estimator is then proposed to fuse the two estimators together in the sense of the minimum mean square error (MMSE). Analytical results show that the statistical performances of the weighted inner product estimator are always better than its traditional cross product counterpart. The efficacy of the weighted inner product estimator and the correctness of the analytical predictions are demonstrated by simulation results.     

基于Lagrange方法的单旋翼飞行器动力学建模

为了进行微小型单旋翼飞行器的动力学建模,通过建立多个坐标系来反映各部分间的相对运动.首先,利用坐标变换得到位置、速度及加速度等向量,并代入拉格朗日方程得到运动学模型;然后,对模型进行数值求解,得到飞行器的姿态响应.仿真结果表明,飞行器定点盘旋时合外力为零,能量保持不变;爬升或前飞时有非保守力做正功,能量增大.     

杆状物对舰载比幅测向的影响研究

通过对杆状物信号反射的分析,研究了舰上杆状物对无源比幅测向的影响,对其中杆状物与天线距离、杆状物截面半径、长度、入射雷达信号波长等因素造成的无源比幅测向误差进行了定量分析。     

Blank Panel Design of Integral Wing Skin Panels Based on Feature Mapping Methods

A blank panel design algorithm based on feature mapping methods for integral wing skin panels with supercritical airfoil surface is presented.The model of a wing panel is decomposed into features,and features of the panel are decomposed into information of location,direction,dimension and Boolean types.Features are mapped into the plane through optimal surface development algorithm.The plane panel is modeled by rebuilding the mapped features.Blanks of shot-peen forming panels are designed to identify the effectiveness of the methods.     

对GPS区域映射系统中比例优化的研究

GPS区域映射系统通过对分布式转发器的时延控制，实现定位区域上的映射关系，使由GPS制导的武器错误定位，从而偏离原有的目标，实现对重要目标的保护^[1]。文章首先给出了求解区域映射系统中虚拟点邻域的迭代算法，在此基础上分析了虚拟点与真实点的位置关系以及转发器的分布对映射比例的影响，并在有效干扰区域内，对如何选择虚拟点的位置和转发器的分布以达到映射比例的优化进行了研究，得出的结论为实际应用提供了参考。     

机载监测系统对地面通信网站空间特性参数的测量分析

基于机载监测系统对地面固定通信站电磁目标的测向定位,提出利用飞行航线上各观测点到辐射源的距离信息和相应的接收机输出电平,对目标有效辐射功率(EIRP)及天线的一些特性参数进行估计的方法。该方法对无线电管理具有一定的参考价值。     

飞机CAD／CAM过程中数据流向的探讨

从回顾南飞公公开展ＣＡＤ／ＣＡＭ工作情况入手，对ＣＡＤ／ＣＡＭ过程中数据流向问题进行了探讨，分析了不足之处，提出了改进数据流向的新思路。     

A Self-organizing Bearings-only Target Tracking Algorithm in Wireless Sensor Network

In the bearings-only target tracking, wireless sensor network (WSN) collects observations of the target direction at various nodes and uses an adaptive filter to combine them for target tracking. An efficient network management is necessary to gain an optimal tradeoff between locating accuracy and energy consumption. This article proposes a self-organizing target tracking algorithm to select the most beneficial subset of nodes to track the target at every snapshot. Compared with traditional methods, this scheme avoids the need for keeping global position information of the network as in greedy selection. Each node judges its future usefulness depending on the knowledge of its own position and using simple mathematics computation. Simulations indicate that this scheme has locating accuracy comparable to the global greedy algorithm. Also, it has good robustness against node failure and autonomous adaptability to the change of the network scale. Furthermore, this algorithm consumes limited energy because only a portion of nodes partakes in the selection at every snapshot.     

基于方向投影的堑壕和交通壕自动检测

对航空照片上堑壕和交通壕的判读是野战工事判读中一项重要的内容，对堑壕和交通壕影像的检测是该项判读工作的技术基础。本文提出了航空照片图上的基准点，并给出了基于方向投影基准点的堑壕和交通壕自动检测方法。